Avaya BSR252_2 6 0 0 011C0 User's Manual

Avaya Business Secure Router User's Manual - BSR252_2 6 0 0 011C0.
Download
Page  of 3
4.5, 2335 votes
background image

©2010 Nortel Networks Limited 

Rev: 1.0 (01/07/2010) 

Page 1 of 3 

 

Business Secure Router 252 2.6.0.0.010  

 

 

1.  Release Summary 

Release Date:  07-Jan-2010 
Purpose:   

Software patch release to address customer change request and documentation changes. 

2.  Important Notes Before Upgrading to This Release 

Save existing configuration prior to upgrade. See BSR 252 Configuration Basics for upgrade and backup 
procedures. 

3.  Platforms Supported 

Business Secure Router 252 

4.  Notes for Upgrade 

For details on updating the software on your Business Secure Router, please see “Nortel Business Secure Router 
252 Configuration Basics
” for software release 2.6 (NN47922-500). To download this document, go to 
http://www.nortel.com/support, and select Security and VPN. Under VPN, select Business Secure Router 252
Click on Documentation in the gray banner to view a list of all documentation for the product. The new .rom file 
must also be used when upgrading for this release. The new default .rom file can be loaded using the WEB UI. 
This can be done from the F/W upload menu accessed from the Maintenance Menu. Save your existing file, 
upgrade with the new .rom (packaged in the .zip file of this release), and then restore your saved configuration.

 

 
File Names For This Release 
 

File Name 

Module or File Type 

File Size (bytes) 

VBSR252_2.6.0.0.010C0.bin Business 

Secure Router 252 device image 

3,506,668 

 
Product Notes: 
1. 

FW is built base on Ethernet firmware load VBSR222_2.6.0.0.003 

2. 

Restore to Factory Defaults Setting Requirement: no 

3. 

The default values of Contivity Client are as follows: 
Phase 1: 3DES, SHA1, DH2 or 3DES, MD5, DH2. 
Phase 2: 3DES, SHA1, PFS DH2 or 3DES, MD5, PFS DH2. 

4. 

On demand client tunnel CI command - ”ipsec config ODService”. 

5. 

When any bug related to IPSec is found, please attach your rom file into SPR system due to we need to 
analyze the correct rule. 

6. 

When users restore to default rom file, BSR252 will save port information to rom file once. 

7. 

When enabling Contivity client fail-over and connect to defined Contivity server, rom file will be written with 
three fail-over IP addresses after the tunnel established. 

8. 

Multi-user configuration only supports SMT and eWC. 

9. 

To support 802.1X over Ethernet, we suggest to use Odyssey Client. 

10.  Contivity client will not make traffic with it’s destination in WAN subnet go through tunnel 

0.590054s