Avaya 1230 Installation Guide

Avaya Cordless Telephone Installation Guide - 1230.
Download
Page  of 1
4.1, 1717 votes
background image

22

21

19

20

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

If you require a Global Power Supply for your IP Deskphone, 

use the Avaya-approved global power supply (NTYS17xxE6).

Your IP Deskphone supports both AC power and Power over 

Ethernet (PoE). For AC power, use only the Avaya-approved 

Global Power Supply (NTYS17xxE6) and the country-specific 

IEC cable that you can order separately. To use PoE, your 

connected LAN must support PoE.

Connect the DC barrel connector to the power jack in the 

back of the IP Deskphone. 

Plug the country-specific IEC cable into the Global 

Power Supply, and then plug the Global Power Supply 

into the nearest AC power outlet.

Plug one end of the LAN Ethernet cable into the LAN Ethernet port, marked with the    symbol, in the back of the 

IP Deskphone. 

To connect your computer to the LAN through the IP Deskphone, plug one end of the PC Ethernet cable (not 

supplied) into the PC Ethernet port, marked with the     symbol, in the back of the IP Deskphone.

Remove the foot stand.

Thread the cable through the channel in the foot stand.

Thread the cable through the channel in the foot stand.

Ensure all cables are properly routed and the IP Deskphone 

is functioning.

Slide the IP Deskphone down on the screws to secure the IP Deskphone.

For more detailed installation instructions, see Avaya 1200 Series IP 

Deskphone Installation  (NN40050-302) at www.avaya.com.

Align the keyholes on the back of the IP Deskphone with the screws in the wall.

Make a small mark on the wall where you want the top keyhole slot to align 

and insert a screw (not provided) so that it protrudes slightly from the wall.
Measure a straight line down from the mark, approximately 9 cm (3.5 in.).

Make a second mark to identify the position of the second key-hole and insert a screw (not 

provided) so that it protrudes slightly from the wall.

Plug the other end of the cable into the LAN port on your computer.

Plug the other end of the cable into your LAN Ethernet connection. 

The LAN LED in the back of the IP Deskphone lights when a LAN connection is established. 

NN40050-301 02.01

May 2011

Thread the cable through the channel in the foot stand to 

secure the cable. 

Ensure that you have the following package contents:

 

●IP Deskphone 

 

●foot stand

 

●handset

 

●handset cord

 

●2.1 m (7 ft) CAT5 Ethernet cable

 

●number plate and lens

Package contents

Before you start

Attaching the foot stand 

Connecting the Global Power Supply (optional) 

Installing the LAN Ethernet cable

Wall-mounting the IP Deskphone (optional)

Installing the PC Ethernet cable (optional)

Installing the handset

Installing the headset (optional)

Align the bottom tabs on the foot 

stand with the position 1 slots or 

the position 2 slots on the back of 

your IP Deskphone, and snap the 

foot stand into place.

In position 1 the IP Deskphone 

sits at a 25 degree angle.

In position 2 the IP Deskphone 

sits at a 55 degree angle.

Plug one end of the handset cord (short straight section) into the handset.

Plug the other end of the handset cord (long straight section) into the handset jack, marked with the   symbol, in the 

back of the IP Deskhone.

Plug one end of the headset cord into the headset jack, marked with the    symbol, in the back of the IP 

Deskphone.

Thread the long straight section of the cord through the channel in the side of the foot stand. 

Thread the cord through the channel in the side of the foot stand.

Keyhole

Keyhole

1230 IP Deskphone

PC Ethernet

LAN Ethernet

LAN LED

AC Power

Handset

Headset

Do not extend the LAN Ethernet cable to the outside of the building.

Bottom tabs

Position 1

Position 2

This document provides information about the 

Avaya 1200 Series IP Deskphones. You can 

download all required documents at 

www.avaya.com

1210/1220/1230 

Avaya 1200 Series IP Deskphone

Related Manuals for Avaya 1230

0.549037s