AT&T EL52200 User's Manual | Page 9

AT&T Cordless Telephone User's Manual - EL52200.
Download
Page  of 82
4.1, 2210 votes
background image

4

Getting started

Install the telephone base and charger as shown below. If you subscribe 
to high-speed Internet service (DSL - digital subscriber line) through your 
telephone line, you must install a DSL filter between the telephone line cord 
and the telephone wall jack. The filter prevents noise and caller ID problems 
caused by DSL interference. Please contact your DSL service provider for more 
information about DSL filters.

The telephone base comes ready for tabletop use. If you want to mount your 
telephone on a wall, refer to 

Wall mount installation on page 7 for details.

Telephone base and charger installation

Telephone line cord

DSL filter (not included) is 
required if you have DSL 
high-speed Internet service.

Telephone wall jack

Electrical outlet not 
controlled by a wall 
switch

Plug the small end 
of the larger power 
adapter into the power 
jack on the bottom of 
the telephone base.

Plug the large end 
of the larger power 
adapter into an 
electrical outlet not 
controlled by a wall 
switch.

Plug one end of the 
telephone line cord 
into the 

TEL. LINE jack 

on the bottom of the 
telephone base.

Plug the other end of 
the telephone line cord 
into a telephone wall 
jack.

Route the cords 
through the slots.

IMPORTANT INFORMATION:
Use only the power adapters provided with this 
product. To obtain a replacement, visit our website 

at 

www.telephones.att.com or call 

1 (800) 222-3111. In Canada, dial  
1 (866) 288-4268.

Plug the large end 
of the smaller power 
adapter into an 
electrical outlet not 
controlled by a  
wall switch.

Ensure the small end 
of the smaller power 
adapter is plugged 
into the power jack 
on the bottom of the 
charger.

 

Also See for AT&T EL52200

Related Manuals for AT&T EL52200

0.489667s