Ariston SL16.1P User's Manual | Page 4

Ariston Ventilation Hood User's Manual - SL16.1P.
Download
Page  of 5
4.6, 2133 votes
background image

Consult  the  designs  in  the  front  pages  referenced  in  the  text  by

alphabet  letters.    Closely  follow  the  instructions  set  out  in

this  manual.  All  responsibility,    for  any  eventual  inconveniences,

damages  or  fires  caused  by  not  complying  with  the  instructions

in  this  manual,    is  declined.

The  cooker  hood  has  an  upper  air  duct  B1  and  an  optional  rear

air  duct  B2,  for  external  fumes  exit.

Select  the  suitable  air  duct  and  apply  the  flange  C  supplied,

ensure  to  close  the  unused  hole  duct  with  tap  D    supplied  if

provided.

Check  that  the  filter/suction  selector  (inside  the  cooker  hood)

G  is  in  the  suction  (A)  position.    In  the  case  where  it  is  not

possible  to  discharge  the  cooking  fumes  externally,  the  cooker

hood  may  be  used  in  the  filter  version  by  fixing  a  carbon  filter,

the  fumes  and  vapours  are  recycled  via  the  anterior  grill  placed

above  the  control  panel.    Check  that  the  suction/filter  selector

is  in  the  filter  (F)  position.

Installation - Do not tile, grout or silicone this appliance to the wall.

Surface  mounting  only.  Do  not  fix  chimney  flue  to  furniture  or  fly

over  shelves  unless  the  chimney  flue  can  be  easily  removed,

in  case  maintenance  is  ever  required.The  cooker  hood  must  be

placed  at  a  minimum  distance  of  60  cm  from  the  cooking  plane

for  electric  cookers  and  75cm  for  gas  or  mixed  cookers.  The

cooker  hood  may  be  installed  on  the  wall  or  on  the  base  of  a

cabinet;  if  supplied,  use  the  hole  gauge  H  to  drill  the  correct

distance,  otherwise  lean  the  cooker  hood  on  the  wall  or  on  the

base  of  the  cabinet  and  mark  the  holes  with  a  pencil.

Wall mounting - Insert the wall screw anchors J in the drilled holes

and  the  two  K  screws  in  the  upper  drill  holes,  remove  the  grill

and  hook  the  cooker  hood  to  the  2  screws,  finally  from  the  inside,

insert  the  third  screw  L  and  lock  them  all  in.

Cabinet fixing - Affix the cooker hood with the 4 M screws from

inside  the  cabinet.

Electrical connection - The electrical tension must correspond

to  the  tension  noted  on  the  label  placed  inside  the  cooker  hood.

Connect  the  electrical  plug,  where  provided,  to  the  an  easily

accessible  outlet  in  conformity  with  local  standards  in  force.

Where  an  electrical  plug  is  not  provided  (for  direct  connection

to  electrical  network)  place  a  standards  approved  bipolar  switch

with  an  aperture  distance  of  not  less  than  3mm  (accessible)  from

the  contacts.

Operation - The control panel is situated on the front of the cooker

hood  and  is  equipped  with  various  suction  speeds.    Use  the

highest  speed  for  situations  of  high  level  vapour  concentration

in  cooking.  Always  open  the  vapour  collector  N.  It  is  advisable

to  switch  on  the  suction  at  least  5  minutes  prior  to  cooking  and

leave  it  in  operation  for  15  minutes  approximately  after  cooking

is  terminated.

Maintenance  -  Prior  to  any  maintenance  operation  ensure  that

the  cooker  hood  is  disconnected  from  the  electrical  outlet.

Cleaning  -  The  cooker  hood  should  be  cleaned  regularly

internally  and  externally.  For  cleaning  use  a  cloth  moistened

with  denatured  alcohol  or  neutral  liquid  detergents.    Avoid

abrasive  detergents.

Failure  to  carry  out  the  basic  standards  of  the  cleaning  of  the

cooker  hood  and  replacement  of  the  filters  may  cause  fire  risks.

Grease  Filter  –  may  be  one  of  the  following  types:

Metallic  filter  must  be  cleaned  once  a  month  with  suitable

detergents  either  by  hand  or  in  dishwasher  (65°C).

When  washed  in  a  dish  washer,  the  grease  filter  may  discolour

slightly,  but  this  does  not  affect  its  filtering  capacity.

In  order  to  remove  the  grease  filter  open  the  grill  via  the  P  hooks

and  free  the  R1  or  R2  stoppers.

The  self-supporting  metal  filter  does  not  include  a  support

grill,  in  order  to  remove  the  filter  –  pull  the  release  springs  P4

backwards  and  slide  the  filter  downwards.

Attention!    the  metal  filter  may  discolour  if  washed  in  dishwasher

but  the  filtering  performance  is  unaltered.

Carbon  Filter - to be replaced every 6 months

Mounting:  Remove  the  cover  W  by  rotating  the  O  knobs  to  90°

fit  the  carbon  filter  V  and  fix  by  rotating  the  O  knobs  to  90°,  then

close  the  cover.    Proceed  in  the  inverse  for  dismounting.

Replacing lightbulbs 40W - Unscrew the damaged light bulb and

replace  with  an  incandescent  oval  light  bulb  with  a  maximum

of  40W  E14.  Remove  the  grill  in  order  to  reach  the  light  bulb  area.

Replacing the hologen bulbs - Access the light compartment –

extract  the  lamp  cover  by  levering  it  off  with  a  small  screwdriver

or  similar  tool.

Warning!  Prior  to  touching  the  light  bulbs  ensure  they  are  cooled

down.  Replace  the  damaged  light  bulb.  Only  use  halogen  bulbs

of  20W  max  (G4),  making  sure  you  do  not  touch  them  with  your

hands.  Close  the  lamp  cover  (it  will  snap  shut).

Caution  -  This  appliance  is  designed  to  be  operated  by  adults.

Children  should  not  be  allowed  to  tamper  with  the  controls  or  play

with  the  appliance.

Do  not  use  the  cooker  hood  where  the  grill  is  not  correctly  fixed!

The  suctioned  air  must  not  be  conveyed  in  the  same  channel

used  for  fumes  discharged  by  appliances  powered  by  other  than

electricity.    The  environment  must  always  be  adequately

aerated  when  the  cooker  hood  and  other  appliances  powered

by  other  than  electricity  are  used  at  the  same  time.      Flambé

cooking  with  a  cooker  hood  is  prohibited.  The  use  of  a  free  flame

is  damaging  to  the  filters  and  may  cause  fire  accidents,  therefore

free  flame  cooking  must  be  avoided.    Frying  of  foods  must  be

kept  under  close  control  in  order  to  avoid  overheated  oil  catching

fire.  Carry  out  fumes  discharging  in  accordance  with  the

regulations  in  force  by  local  laws  for  safety  and  technical

restrictions.

Related Manuals for Ariston SL16.1P

0.654521s