Ariston HR 601 C A AUS Instructions for Use | Page 4

Ariston Cooktop Instructions for Use - HR 601 C A AUS.
Download
Page  of 8
4.6, 1229 votes
background image

4

•  To make the most of your new appliance, please read the user 

instructions carefully and keep them handy for future consultation.

BEFORE USING THE GLASS CERAMIC HOB

INSTALLATION

Cooktop

•  The cooktop must be set into a worktop between 20 mm and 50 mm 

deep

•  There must be nothing between the cooktop and the oven (cross 

rails, brackets, etc.).

•  The distance between the lower face of the glass ceramic hob and the 

cupboard or separating panel must be at least 20 mm.

•  If the cooktop is to be installed next to a column unit, leave a distance 

of at least 100 mm from the edge of the cooktop to the side of the 

column unit.

•  Make an opening in the worktop, respecting the dimensions indicated in 

the enclosed product description sheet.

•  Apply the supplied gasket to the cooktop (unless it has already been fitted), 

after having cleaned its surface.

Important

In order to prevent the electronic circuits from overheating, and therefore from 

being damaged, we recommend the following:

•  Do not install the cooktop near a dishwasher or washing machine, 

so that the electronic circuits do not come into contact with steam 

or moisture, which could damage them.

If an oven (from our range of ovens) is installed beneath the cooktop, make 

sure that it is equipped with a cooling system.If the temperature of the 

electronic circuits exceeds the maximum permitted temperature, the cooktop 

will switch off automatically; in this case, wait for a few minutes until the internal 

temperature of the electronic circuits reaches a tolerable level, at which point 

it will be possible to switch the hob on again.

•  Switch the hob off after use.

Front

Rear wall

min. 5 mm

min. 20 mm

min. 5 mm

3

2

1

Related Manuals for Ariston HR 601 C A AUS

0.615378s