Ariston FI7 891 SP IX A AUS Reference Guide | Page 2

Ariston Ovens Reference Guide - FI7 891 SP IX A AUS.
Download
Page  of 12
4.5, 1652 votes
background image

2

ACCESSORIES

Download the Use and Care Guide from  

www.aristonchannel.com for more information

WWW

WIRE SHELF

DRIP TRAY

BAKING TRAY

SLIDING RUNNERS

MEAT PROBE

TURNSPIT

 GRILL PAN SET

The number of accessories 
may vary depending on 
which model is purchased.
Other accessories can be 
purchased separately from 
the After-sales Service.

INSERTING THE WIRE SHELF AND OTHER 
ACCESSORIES
Insert the wire shelf horizontally by sliding it across 
the shelf guides, making sure that the side with the 
raised edge is facing upwards.

Other accessories, such as the drip tray and the 
baking tray, are inserted horizontally in the same way 
as the wire shelf.

FITTING THE SLIDING RUNNERS
Remove the shelf guides from the oven and remove 
the protective plastic from the sliding runners.

Fasten the upper clip of the 
runner to the shelf guide 
and slide it along as far as it 
will go. Lower the other clip 
into position.

To secure the guide, press 
the lower portion of the 
clip firmly against the shelf 
guide. Make sure that the 
runners can move freely. 
Repeat these steps on the 
other shelf guide on the same level.

Please note: The sliding runners can be fitted on any level

REMOVING AND REFITTING THE SHELF GUIDES
• To remove the shelf guides, lift them up and pull the 
lower parts out of their lodgings: The shelf guides can 
now be removed.

• To refit the shelf guides, first fit them back into their 
upper seating. Keeping them held up, slide them 
into the cooking compartment, then lower them into 
position in the lower seating.

USING THE TURNSPIT

Push the skewer through the 
centre of the meat (bound 
with string if poultry) and 
slide the meat onto the 
skewer until it is positioned 
firmly on the fork and 
cannot move. Push the 
second fork onto the skewer 
and slide it on until it holds 
the meat firmly in place. 

Tighten the fixing screw to secure it in position.

Insert the end into 
the recess provided 
in the oven's cooking 
compartment and rest 
the rounded part on the 
relevant support.

Please note: To collect the 
cooking juices, position the 
drip tray below and add 500 
ml of water. To avoid burning 
yourself when the skewer is hot, only handle it by the plastic 
handle (which must be removed before cooking).

0.596063s