Ariston FA2 844 H IX A AUS Reference Guide | Page 4

Ariston Ovens Reference Guide - FA2 844 H IX A AUS.
Download
Page  of 8
4.1, 1482 votes
background image

4

PROGRAMMING THE END COOKING TIME/DELAYED 
START
After a cooking time has been set, starting the 
function can be delayed by programming its end 
time: press 

 until the 

 icon and the current time 

start flashing on the display.

Use 

 or 

 to set the time you want cooking to end 

and press 

 to confirm. 

Activate the function by turning the 

thermostat knob 

to the temperature you require: the function will 
remain paused until it starts automatically after the 
period of time that has been calculated in order for 
cooking to finish at the time you have set.

Notes: To cancel the setting, switch the oven off by turning 
the 

selection knob to position “ ”.

END OF COOKING
An audible signal will sound and the display will 
indicate that the function has finished.

Turn the 

selection knob to select a different function 

or to position “

” to switch the oven off.

Please note: If the timer is active, the display will show “END” 
alternately with the remaining time.

. SETTING THE TIMER
This option does not interrupt or program cooking 
but allows you to use the display as a timer, either 
during while a function is active or when the oven is 
off.

Keep pressing 

 until the 

 icon and “00:00” start 

flashing on the display.

Use 

 or 

 to set the time you require and press 

 

to confirm.
An audible signal will sound once the timer has 
finished counting down the selected time.

Notes: To cancel the timer, keep pressing 

 until the 

 icon 

starts flashing, then use 

 to reset the time to “00:00”.

. DIAMOND CLEAN FUNCTION
To activate the “Diamond Clean” cleaning function, 
pour 200 ml of drinking water into the bottom of the 
oven, then turn the 

selection knob and the thermostat 

knob to the   icon.
Please note: The position of the icon does not correspond to 
the temperature reached during the cleaning cycle.

The function will activate automatically: the display 
shows the time remaining to the end, alternating with 
“DC”.

Please note: It is only possible to programme the end time of 
this function. The duration is automatically set to 35 minutes.

0.590902s