Ariston AQ104D69D AUS Installation Instructions | Page 7

Ariston Washers Installation Instructions - AQ104D69D AUS.
Download
Page  of 12
4.2, 2406 votes
background image

AUS

7

WASH CYCLE 

SELECTOR knob

Button with

 ON/OFF 

indicator light

Touch control panel

Button with   ON/OFF indicator light: press this briefly to switch 
the machine on or of . The green indicator light indicates that the 
machine is switched on. To switch of  the washing machine during 
the wash cycle, press and hold the button for approximately 3 
seconds; if the button is pressed briefly or accidental y the machine 
wil  not switch of . If the machine is switched of  during a wash 
cycle, this wash cycle wil  be cancel ed.

WASH CYCLE SELECTOR knob: may be turned in either 
direction. To select the most suitable wash cycle, please refer 
to the “Table of wash cycles”.
The knob will not move during the wash cycle.

M1-M2-M3 buttons: press and hold one of the buttons to 
store a cycle with your own set preferences in the memory 
of the machine. To recall a previously-stored cycle, press the 
corresponding button.

TEMPERATURE 

 button: press to modify or exclude the 

temperature setting; the value selected will appear on the 
display above (see “Running a wash cycle”).

SPIN CYCLE 

 button: press to modify or exclude the spin 

cycle; the value selected will appear on the display above (see 
“Running a wash cycle”).

DELAYED START 

 button: press to set a delayed start for 

the selected wash cycle; the set delay time will appear on the 
display above (see “Running a wash cycle”).

OPTION buttons: press to select the available options. The 
indicator light corresponding to the selected option will remain 
lit (see “Running a wash cycle”).

WASH CYCLE PHASE icons: these illuminate to indicate the 
progress of the wash cycle (Wash 

 – Rinse 

 – Spin 

 – 

Drain

 

). The text 

 lights up when the cycle is complete.

START/PAUSE button with indicator light: when the green 
indicator light flashes slowly, press the button to start a wash 
cycle. Once the cycle has begun the indicator light will remain 
lit in a fixed manner. To pause the wash cycle, press the button 

again; the indicator light will flash in an orange colour. If the 
“Door locked”   indicator light is switched off, the door may 
be opened. To start the wash cycle from the point at which it 
was interrupted, press the button again.

DOOR LOCKED   indicator light: indicates that the porthole 
door is locked. To open the door, pause the wash cycle (see 
Running a wash cycle”).

CONTROL PANEL LOCK 

 button with indicator light: to 

activate or deactivate the control panel lock, press and hold 
the button for approximately 2 seconds. when the indicator 
light is illuminated, the control panel is locked. This means 
it is possible to prevent wash cycles from being modified 
accidentally, especially where there are children in the home.

ECO indicator light: the 

 icon lights up when, after altering the 

washing parameters, an energy saving of at least 10% is made. 
Furthermore, before the machine enters “Standby” mode, the 
icon wil  light up for a few seconds; when the machine is switched 
of  the estimated energy saving wil  be around the 80% mark.

CHANGE LANGUAGE
The first time the machine is switched on, the first language 
wil  flash on the display. The “ “, “OK” and “V” symbols will 
appear on the display, in line with the 3 buttons on the right-
hand side. The languages change automatical y every 3”; 
alternatively, they can be changed by pressing the buttons next 
to the “ “ and “V” symbols. Use the “OK” button to confirm the 
language, which wil  be set after 2”. If no buttons are pressed, 
the automatic language change wil  begin again after 30”.
To change the language, switch the machine on and off 
again; in the 30” time period after it has been switched off, 
press and hold the temperature 

 +spin 

 +delayed 

 start 

buttons simultaneously for 5’’. A short sound alert wil  be emitted 
and the set language wil  flash on the display. Press the buttons 
next to the “ “ and “V” symbols to change the language. Use the 
button next to the “OK” symbol to confirm the language, which 
wil  be set after 2”. If no buttons are pressed, the language set 
previously wil  be displayed after 30”. Switch on the machine.

TEMPERATURE 

button

OPTION 

buttons 

SPIN 

button

DISPLAY

M1

M3

ECO 

indicator light

DELAYED START 
button

START/PAUSE button 
with indicator light

DOOR LOCKED indicator light

WASH 
CYCLE 
PHASE
 
icons 

CONTROL PANEL LOCK 
button with indicator light

M2

0.588258s