Ariston A6VMH60 X AUS Operating Instructions | Page 8

Ariston Cookers Operating Instructions - A6VMH60 X AUS.
Download
Page  of 16
4.6, 1746 votes
background image

8

AU

Planning cooking with the electronic 
programmer

Setting the clock
After the appliance has been connected to the power 
supply, or after a blackout, the display will automatically 
reset to 0:00 and begin to blink. To set the time:
1. Press the COOKING TIME button 

 and the COOKING 

END TIME 

 simultaneously.

2. Within 4 seconds of having pressed these buttons, 
set the exact time by pressing the 

 and  buttons. 

The 

 button advances the hours and the  button 

decreases the hours.
Once the time has been set, the programmer automatically 
switches to manual mode.

Setting the timer
The timer enables a countdown to be set, when the time 
has elapsed a buzzer sounds.
To set the timer proceed as follows:
1. press the TIMER button 

+. The display shows:

1.

2. Press the 

 and  buttons to set the desired time.

3. When the buttons are released the timer begins 
counting down and the current time appears on the 
display.

5

4. After the time has elapsed a buzzer will sound, and 
this can be switched off by pressing any button (except 
the 

 and  buttons). The symbol +will switch off. 

!

 The timer does not switch the oven on or off.

Adjusting the volume of the buzzer
After selecting and confirming the clock settings, use 
the 

 button to adjust the volume of the alarm buzzer.

Setting the cooking time with a delayed start 
First decide which cooking mode you wish to use and 
set a suitable temperature using the SELECTOR and 
THERMOSTAT knobs on the oven.
At this point it is possible to set the cooking time:
1. Press the COOKING TIME button 

.

2. Within 4 seconds of having pressed this button, set 
the desired amount of time by pressing the 

 and  

buttons. If, for example, you wish to set a cooking time 
of 30 minutes, the display will show:

1

3. 4 seconds after the buttons are released, the current 
time (for example 10.00) reappears on the display with the 
symbol 

Pand the letter A (AUTO).

Next the desired cooking end time must be set:
4. Press the END COOKING TIME button 

.

5. Within 4 seconds of having pressed this button, adjust 

the cooking end time by pressing the 

 and  buttons. 

If, for example, you want cooking to end at 13.00, the 
display shows:

2

6. 4 seconds after the buttons are released, the current 
time (for example 10.00) reappears on the display with 
the letter A (AUTO). 

3

At this point, the oven is programmed to switch on 
automatically at 12:30 and switch off after 30 minutes, 
at 13.00. 

Setting the cooking time with an immediate start 
Follow the above procedure for setting the cooking time 
(points 1-3).

! When the letter A appears, this indicates that both 
the cooking time and the end cooking time have been 
programmed in AUTO mode. To restore the oven to 
manual operation, after each AUTO cooking mode press 
the COOKING TIME 

 and END COOKING TIME  

buttons simultaneously.

! The symbol 

Pwill remain lit, along with the oven, for 

the entire duration of the cooking programme. 

The set cooking duration can be displayed at any time 
by pressing the COOKING TIME button 

!, and the 

cooking end time may be displayed by pressing the END 
COOKING TIME button 

. When the cooking time has 

elapsed a buzzer sounds. To stop it, press any button 
apart from the 

 and  buttons.

Cancelling a previously set cooking programme
Press the COOKING TIME button 

 and the COOKING 

END TIME 

 simultaneously.

Correcting or cancelling previously set data
The data entered can be changed at any time by pressing 
the corresponding button (TIMER, COOKING TIME or 
COOKING END TIME) and the 

 or  button.

When the cooking time data is cancelled, the cooking end 
time data is also cancelled automatically, and vice versa. 
If the oven has already been programmed, it will not 
accept cooking end times which are before the start of 
the programmed cooking process. 

0.572803s