Apple C2h15d User's Manual

Apple Computer Monitor User's Manual - C2h15d.
Download
Page  of 2
4.6, 1440 votes
background image

P R E C A U T I O N S

1

2

3

4

SPECIFICATION

Property Description

Monitor Type

Integrated dual screen LCD

Size and Weight

19" x 27.0" x 10.0" (H x W x D) approximately 
17 lbs (8 kg)

Power Requirements

Line Voltage: 100 to 240 VAC, 50 - 60 Hz 
Power: 18W (operating)

Resolution (per screen, multi-scan)

640 x 400, 720 x 400, 640 x 480, 800 x 600, 
832 x 624, and 1024 x 768

Resolution (aggregate max.)

2048 X 768

Pixel Pitch

0.297 (H) x 0.297 (V)

Color Depth

More than 16 million

Viewing Angle

H +65°/-65° V+55°/-45° typical

2

Brightness

250cd/m

Contrast Ratio

400:1 typical

Screen Size and Type

15" diagonal active matrix TFT

Surface Treatment

Anti-glare and hard coatings 2H

User Controls

Power on/off  
On Screen Control - Menu

Select up/down
Increment / decrement

Approvals

FCC, CE, Entela, Energy Star

Input Connections

Two x 29-pin DVI-I connectors

Support Structure

Aluminum

TROUBLESHOOTING

Problem

Suggested remedies

No image on one or more screens

Make sure cables are properly fastened.
Check power to monitors.
Check video connection from computer to 
monitors.
Check seating and bus location of video card.
Use known working monitor to check for signal.
Re-boot the computer.
Re-install driver software.

Screen viewing order is incorrect.

Use driver software to re-tile monitor order.

Colors are not clear.

Check color settings within the O/S controls..

Screens will not stay in one position.

Check to make sure screen mounting pivots 
are properly fastened and tightened.

INTERFACE DESCRIPTION

REAR CONTROL PANEL

Power 

Turns the monitor On/Off

Menu

Displays the menu. Exits the menu or control screen.

Up/Down Select 

Highlights next menu item

Increment/Decrement

(+/-) Changes the value of the selected item or 
highlights the next menu item in a submenu. 

FRONT PANEL

Green light = power on 

Amber light = loss of video

REAR CONTROL PANEL

FRONT PANEL

LOCATION OF CONTROLS

Power Light

Menu

Directional Select

Power

N/A

OPERATION

1. Ensure power is off before proceeding with the installation.

2. Connect the video cable marked with "A" to the first video output of your computer.

3. Similarly connect the video cable marked with "B" to the second video output of your computer.

4. Connect the output cables of the power supplies to the five pin DIN connectors.

5. Connect the power cords.

6. Turn your computer on.

7. Turn the screens on by pressing the power button located on the lower back of each 

monitor. Power indicator will light.

USING THE QUICK RELEASE

‘quick release’ latch

depress latch to
release LCD

locked position

lift LCD

slide LCD

in place

To lock LCD

To unlock LCD

Note: remove connector
before depressing latch 

DETAIL OF QUICK RELEASE SYSTEM

DOCKING YOUR LCD AND TIGHTENING BALL JOINT

1. Match the ‘dove tail’ to ensure that the LCD unit sits flat against the ‘ball and socket’ 

assembly.

2. Simply slide the two interlocking parts, while ensuring that the unit is locked in place. Now 

you can proceed and install the connectors.

3. To remove the LCD head reverse the procedure. To unlock the LCD unit you must depress 

the ‘quick release’ latch. Ensure a proper grip on the LCD to prevent it from slipping. 
When removing the LCD panels make sure you counter the weight of the other LCD 
screens to prevent the unit from tipping.
 Lift the LCD panel and place on a flat surface.

4. To tighten ‘ball joint’ simply turn two 

screws (A), turn a quarter turn until desired 

position is achieved. 

5. Review Detail of Quick Release System (above) for the location of the ‘quick release’ latch. 

Phillips 

(A) Phillips screws

CONNECTING YOUR MONITORS

ON SCREEN DISPLAY MENU

OTHER INFORMATION

OSD FUNCTION

SUB-MENU FUNCTIONS

WARRANTY STATEMENT(S)

CUSTOMER SUPPORT

OTHER LCD INFORMATION

FCC INFORMATION

B

S I D E

S I D E

MAINTENANCE

Liquid Crystal Displays are highly 
sophisticated pieces of equipment. Avoid 
touching the screen surface with any sort of 
hard object, as this may result in scratches, 
which will reduce the effectiveness of the 
display and are not covered by your warranty.

Always handle your monitor with care when 
moving. If you move the screens around on a 
frequent basis, it is also good idea to 
periodically check to ensure that all fittings 
and screws are tight.

STARTING THE FIRST TIME

In a multiple screen configuration, most video 
cards will boot one screen first, thus allowing 
you to configure your system as you see fit. 
Once the appropriate drivers have been 
loaded, the system will re-boot and bring up 
both screens. You may then proceed to 
arrange your desktop, configure any 
particular environment characteristics you 
wish, and start up your applications.

G E T T I N G  S T A R T E D

PRECAUTIONS

Avoid touching or applying pressure to the 
screen with your fingers as damage to the 
liquid crystal layer may occur. Wipe marks 
from the screen with absorbent cotton or a 
soft cloth. Do not use chemical cleaners.

The monitor contains high voltage parts.
You may suffer serious injury if you touch 
these parts.

Avoid exposing the monitor to direct sunlight 
or another heat source. The monitor  should 
be facing away from direct sunlight to 
reduce glare.

Do not place anything on the monitor that 
blocks the flow of air through the vent which 
may prevent adequate dissipation of heat.

Ensure the area around the monitor is clean 
and free of moisture.

Do not place heavy objects on the monitor, 
video cable or power cord.

If smoke, abnormal noise, or strange odor is 
present, immediately switch the monitor off 
and call your dealer. It is dangerous to 
continue using the monitor.

PACKAGE CONTENTS

Your C2H15D  dual format package includes:

A dual head monitor system with integral 
video cables terminated with 29-pin DVI-I 
connector.

One universal input power supply complete 
with power cord. 

User manual, Support Structure assembly 
instructions

Support Structure fasteners

Warranty Statement

Registration Card

Macintosh adapter (optional)

GETTING STARTED

UNPACKING YOUR MASS 
MULTIPLES™

CONNECTING YOUR 
MONITORS

LOCATION OF CONTROLS 

SPECIFICATIONS

STARTING THE FIRST TIME

PACKAGE CONTENTS

MAINTENANCE

PRECAUTIONS

OPERATION

TROUBLESHOOTING

USING THE QUICK RELEASE

Carefully unpack the LCD monitors. 

IMPORTANT:
Handle the monitors with care so that 
pressure is not placed on the front surface of 
the LCD panel as this may result in 
permanent damage to the panel. Don’t rest 
any objects on top of the screens.

After confirming that all the LCD panels are 
secured, feel free to adjust the panels to the 
desired position. Hold the LCD screen 
without applying pressure on the LCD 
surface, and adjust. Proceed to connect the 
display system to your computer as detailed 
in this user manual. Connect monitor to 
appropriate cables provided.

Caution: secure base when installing LCD 
screens.
  
To prevent the unit from tipping 
assemble screens from center out. If base 
tray is available simply slide from assembly. 

Once you’ve located the structure at a 
desired location then simply slide the LCD 
monitors onto patented ‘quick release’ 
system. Ensure that the LCD panel locks in 
place.

Unpack the structure carefully. 

If base needs to be assembled refer to 
Support Structure assembly procedure on 
how to assemble base using wing nut and 
washers provided.

If a base tray is available use this  to prevent 
the unit from tipping during installation. Place 
the structure and base tray on a level surface.

Related Manuals for Apple C2h15d

0.732792s