American Standard American Standard Hot Tub 2742.XXXX User's Manual

American Standard Hot Tub User's Manual - American Standard Hot Tub 2742.XXXX.
Download
Page  of 4
4.8, 1667 votes
background image

753027-100 REV. F

© AS America Inc. 2009
All product names listed herein are trademarks
of AS America Inc. unless otherwise noted.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

List of Required Components (not included):

List of Optional Components (not included):

•  Drain 1594.170
•  Bath Filler 

•  Safe-T-Heater 9075.120*

List of Required Tools and Supplies:
Tools
•  Level
•  Tape Measure
•  Pipe Wrench
•  Slip Joint Pliers
•  Screw Driver
•  Standard
      Woodworking Tools
•  Personal Safety
      Equipment
•  Caulking Gun

Supplies
•  Nails
•  Putty
•  Caulking (waterproof)
•  1 x 3 or 2 x 2
      Stringers
•  Drop Cloth
•  20 amp GFI Outlet

•  Cement, Plaster,
      Grout

THANK  YOU...
for selecting an American Standard bath. Your 
new bath is shipped to you after careful 
inspection. The whirlpool version is completely 
assembled with pump, motor, and system 
piping. All you need to finish the installation 
are your selected fittings and electrical 
connections for a whirlpool.

To insure maximum performance and pleasure 
from this product, please follow the 
instructions and cautions. 

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for 
any shipping damage. If such damage is found, 
report it to your vendor immediately.

After inspection and during installation, protect 
the bath from construction damage. After 
installation, and before enclosing with wallboard, 
tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool 
system or remove pump from factory mounting. 
This could adversely affect the safety and 
performance of the whirlpool and void the 
warranty. Do not handle or move the whirlpool by 
the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not 
provided with the bath and must be ordered 
separately. Framing and enclosing materials are 
provided by others. 

Protect all finished surfaces of the whirlpool 
during construction and installation using a drop 
cloth.  

WARNING! Do not lift whirlpool by the piping 
harness at any time.

41-3/4"

(1060mm)

26-3/4

(679mm)

C/L OF DRAIN OUTLET

71-1/2"

(1816mm)

35-3/4"

(908mm)

13-1/4"

(337mm)

4"

(102mm)

3"

(76mm)

FLOOR CUTOUT
5" X 15"
(127 X 381mm)

OUTLINE OF CUTOUT
70" X 40-1/4"
(1778 X 1022mm)

PROVIDE ACCESS
TO PUMP FOR
SERVICE ON ALL
INSTALLATIONS 

INTEGRAL
FITTING DECK
3" X 14"
(76 X 356mm)

ON/OFF

SWITCH

LEVELING STRINGER

(NOT FOR SUPPORT)

1-1/2" N.P.T. THREADS

2"

(51mm)

3-1/4"

(83mm)

C/L OF
OVERFLOW

20"

(508mm)

22"

(559mm)

ROUGH

FLOOR

INTEGRAL

FEET

SUPPORT

1-1/2" O.D.TAILPIECE

5/8"

(16mm)

3"
(76mm)

PUMP

3/4"

(19mm)

JETS (8)

EDGE OF
FLOOR
CUTOUT

SUCTION

PUMP

SAFE-T-

HEATER
REMOVABLE

BLANK

GENERAL SPECIFICATIONS FOR 2742 WHIRLPOOL

71-1/2 x 41-3/4 x 22 In. (1816 x 1060 x 559mm)

115 Lbs. (52 Kg.)

690 Lbs. (313 Kg.)

69 Gal. (261 L)
60 Gal. (227 L)

41 x 21-1/2 In. (1041 x 546mm)
62 x 31-1/2 In. (1574 x 800mm)

14-1/4 In. (362mm)

 33 Lbs./Sq.Ft. (163 Kgs./Sq.m)

27.8
55.7

2.1 HP, 14.4 AMPS ,120V.

WHIRLPOOL PUMP

WHIRLPOOL ELECTRICAL SPECIFICATIONS

INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)

HIGH GLOSS ACRYLIC

SHOWN LESS ALL FITTINGS

TOWN SQUARE®

6' x 42"™ 

INSTALLATION
INSTRUCTIONS

2742.XXXX SERIES WHIRLPOOL / BATHING POOL

0.557187s