American Audio q-d6 User's Manual | Page 8

American Audio DJ Equipment User's Manual - q-d6.
Download
Page  of 17
4.2, 1419 votes
background image

 Q-D6™  

 

 

  

  

 

 

      

                   Controls and Features Cont.

control is always set to zero before turning the unit on.
5. CUE LEVEL VOLUME CONTROL - This knob is used to adjusts the headphone volume output 
level. Turn the knob in a clockwise direction to increase the headphone volume.
6. CUE MIXING CONTROLLER - This knob selects the channel for monitoring. The monitor signal 
comes from the Prefader. This means it will not be affected by the channel faders. You can monitor 
each channel individual y. Connect your headphones to the HEADPHONES JACK (28). Turn the CUE 
MIXING CONTROL to CUE and select the desired channels with the Cue buttons. When you turn the 
CUE MIXING CONTROL to PGM (PFL switches without function), you can cue the output signal of the 
mixer. If the CUE MIXING CONTROL is set to the center position, you can cue both the channel signal 
you selected and the output signal. With the CUE LEVEL control, you can adjust the phones volume 
without changing the output signal.
7. CHANNEL EQUALIZER - All of the channels include a three-band signal EQ. These controls are 
used to increase or decrease the LOW’s, MID’s, and HI’s of the output signal. 
 

CHANNEL TREBLE CONTROL - This knob is used to adjust the treble levels of a channel

  

allowing for a maximum treble gain of 9dB or maximum decrease of -26dB. Turning the knob

  

in a counter-clockwise direction will decrease the amount of treble applied to a channel signal,

 

turning the knob in a clockwise direction will increase the amount of treble applied to a channel

  

signal.

 

CHANNEL MIDRANGE CONTROL - This knob is used to adjust the midrange levels of a  

 

 

channel allowing for a maximum midrange gain of 9dB or maximum decrease of -26dB. 

 

Turning the knob in a counter-clockwise direction will decrease the amount of midrange app-

 

lied to a channel signal, turning the knob in a clockwise direction will increase the amount 

 

of midrange applied to a channel signal.

 

CHANNEL BASS CONTROL - This knob is used to adjust the low frequency levels of a 

 

channel allowing for a maximum bass gain of 9dB or maximum signal decrease of -26dB. 

 

Turning the knob in a counter-clockwise direction will decrease the amount of bass applied to 

 

a channel signal, turning the knob in a clockwise direction will increase the amount of bass 

  

applied to a channel signal.

8.  CUE  BUTTONS  -  These  buttons  are  used  to  activate  a  channels  “CUE”  mode.  A  red  LED  on 
the Cue button will glow when that channels cue mode is activated. Cue mode will send a channels 
incoming signal to the headphones. The cue level is adjusted by the CUE LEVEL VOLUME KNOB 
(5)
. Be sure the cue level is set to minimum before putting a pair of headphones on. Be sure the CUE 
MIXING KNOB (6)
 is turned to the “CUE” position to hear the selected channel source.
9.  CHANNEL FADER - These faders are used to control the output signal of any source assigned to 
its particular channel.
10.  FEATHER FADER PLUS CROSSFADER - This fader is used to blend the output signals of chan-
nels one and three together. When the fader is in the full left position (channel 1), the output signal of 
channel one will be controlled by the master volume level. The same fundamentals will apply for chan-
nel three. Sliding the fader from one position to another will vary the output signals of channels one 
and three respectively. When the crossfader is set in the center position, the output signals of both the 
channels one and channels three will be even. The Channel two fader will work when the crossfader is 
any position.
11.  Q-START  ON/OFF  SWITCH  -  This  function  works  in  conjunction  with  a  compatible  American 

©

American Audio®   -   www.americanaudio.us   -   Q-D6™ Instruction Manual Page 8

0.535542s