Alpine CDE9845 Owner's Manual | Page 6

Alpine Car Stereo System Owner's Manual - CDE9845.
Download
Page  of 27
4.5, 1906 votes
background image

5-EN

Getting Started

CDE-9845

CDE-9843

CDE-9841

Turning Power On and Off

Press SOURCE/POWER to turn on the unit.

• The unit can be turned on by pressing any other button except eject

c and TITLE  .

Press and hold SOURCE/POWER for at least 2
seconds to turn off the unit.

• The first time power is turned on, the volume will start from level 12.

Detaching and Attaching the Front Panel

Detaching
1 Turn off the unit power.
2 Press  (Release) at the lower left side until the

front panel pops out.

3 Grasp the left side of the front panel and pull it out.

• The front panel may become hot in normal usage (especially the

connector terminals on the back of the front panel.) This is not a
malfunction.

• To protect the front panel, place it in the supplied carrying case.

Attaching
1 Insert the right side of the front panel into the main

unit. Align the groove on the front panel with the
projections on the main unit.

2 Push the left side of the front panel until it locks

firmly into the main unit.

2

1

• Before attaching the front panel, make sure that there is no dirt or

dust on the connector terminals and no foreign object between the
front panel and the main unit.

• Attach the front panel carefully, holding the sides of the front panel

to avoid pushing buttons by mistake.

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.

1 Turn off the unit power.
2 Remove the detachable front panel.
3 Press RESET with a ballpoint pen or similar

pointed object.

1

Adjusting Volume

Turn the Rotary encoder (CDE-9845/CDE-9843 only)
or press 

4 and 3 (CDE-9841 only) until the desired

sound is obtained.

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume
level by 20 dB.

Press MUTE/SETUP to activate the MUTE mode.
The audio level will decrease by about 20 dB.

Pressing MUTE/SETUP again will bring the audio
back to its previous level.

SOURCE/POWER

Rotary encoder

c

MUTE/SETUP

SOURCE/POWER

Rotary encoder

SOURCE/POWER

4/3

c

c

RESET switch

MUTE/SETUP

MUTE/SETUP

 

Related Manuals for Alpine CDE9845

0.471017s