Allen & Heath ZED-10FX User's Manual | Page 7
Allen & Heath 7 ZED-10FX User Guide
The wire which is coloured Green and Yellow must be connected to the terminal in the plug
which is marked with the letter E or with the Earth symbol. This appliance must be earthed.
The wire which is coloured Blue must be connected to the terminal in the plug which is
marked with the letter N.
The wire which is coloured Brown must be connected to the terminal in the plug which is
marked with the letter L.
Ensure that these colour codes are followed carefully in the event of the plug being changed.
Water and moisture:
To reduce the risk of fire or electric shock do not ex-
pose the console to rain or moisture or use it in damp
or wet conditions. Do not place containers of liquids on
it which might spill into any openings.
Ventilation:
Do not obstruct the ventilation slots or position the con-
sole where the air flow required for ventilation is im-
peded. If the console is to be operated in a rack unit or
flightcase ensure that it is constructed to allow ade-
quate ventilation.
Heat and vibration:
Do not locate the console in a place subject to exces-
sive heat or direct sunlight as this could be a fire haz-
ard. Locate the console away from any equipment
which produces heat or causes excessive vibration.
Servicing:
Switch off the equipment and unplug the power cord
immediately if it is exposed to moisture, spilled liquid,
objects fallen into the openings, the power cord or plug
become damaged, during lightening storms, or if
smoke, odour or noise is noticed. Refer servicing to
qualified technical personnel only.
Installation:
Install the console in accordance with the instructions
printed in this User Guide. Do not connect the output of
power amplifiers directly to the console. Use audio
connectors and plugs only for their intended purpose.
SAFETY INSTRUCTIONS
TERMINAL
WIRE COLOUR
European USA/Canada
L
LIVE BROWN
BLACK
N
NEUTRAL BLUE
WHITE
E
EARTH GND
GREEN & YELLOW
GREEN
Important Mains plug wiring instructions
The console is supplied with a moulded mains plug fitted to the AC mains power lead.
Follow the instructions below if the mains plug has to be replaced. The wires in the
mains lead are coloured in accordance with the following code:
Related Manuals for Allen & Heath ZED-10FX
-
Behringer DJ Equipment X32 DIGITAL MIXER User's Manual
70 pages
-
Yamaha DJ Equipment FX500 Operation Manual
97 pages
-
Yamaha DJ Equipment GF16/12 Owner's Manual
26 pages
-
Yamaha DJ Equipment GF24/12 Owner's Manual
26 pages
-
Yamaha DJ Equipment SPX50D Operation Manual
105 pages
-
Denon DJ Equipment Denon DJ Equipment DN-X1600 User's Manual
32 pages
-
Denon DJ Equipment Denon DJ Equipment DN-X500 User's Manual
63 pages
-
Kenwood DJ Equipment TK-260G User's Manual
50 pages
-
Kenwood DJ Equipment TK-270G User's Manual
50 pages
-
Peavey DJ Equipment DeltaFex Twin User's Manual
23 pages
-
Behringer DJ Equipment Behringer DJ Equipment NOX606 User's Manual
17 pages
-
Behringer DJ Equipment PRO MIXER VMX300 VMX300 User's Manual
13 pages
-
Dynacord DJ Equipment PowerMate 600 User's Manual
64 pages
-
ION DJ Equipment DISCOVER DJ User's Manual
16 pages
-
Lexicon DJ Equipment MPX 550 User's Manual
111 pages
-
Roland DJ Equipment SP-404SX User's Manual
54 pages
-
Samson DJ Equipment XP510I User's Manual
2 pages
-
Allen & Heath DJ Equipment ZED 12 FX User's Manual
36 pages
-
Allen & Heath DJ Equipment ZED 22 FX User's Manual
36 pages
-
American Audio DJ Equipment q-d6 User's Manual
17 pages
-
American DJ DJ Equipment FS-1000 User's Manual
2 pages
-
Denon DJ DJ Equipment Denon DJ DJ Equipment DN-MC6000 User's Manual
2 pages
-
Stanton DJ Equipment SCS.4DJ User's Manual
64 pages
-
Behringer DJ Equipment X32 DIGITAL MIXER User Manual
70 pages