Alcatel OneTouch ONE TOUCH 993/993D Owner's Manual | Page 9

Alcatel OneTouch Mobile Phones Owner's Manual - ONE TOUCH 993/993D.
Download
Page  of 71
4.8, 1637 votes
background image

15

16

Place  the  SIM  card  with  the  chip  facing  downwards  and  slide  it  into  its 
housing. Make sure that it is correctly inserted. To remove the card, press 
and slide it out.

Installing or removing the microSD card

Insert the microSD card with golden contact facing downwards into the 
slot. To remove the microSD card, gently press and slide it out.

To  remove  the  microSD  card  while  the  phone  is  on,  you  must 

unmount the storage card from the phone first (ref to “To safely 
remove  the  microSD  card  from  your  phone
”),
  to  prevent 
corrupting or damaging the storage card.

Installing or removing the battery
Please power off your phone before removing the battery.

•Insert and click the battery into place, then close the phone cover.
•Unclip the cover, then remove the battery.

Charging the battery

Connect the battery charger to your phone and mains socket respectively.
•Be careful not to force the plug into the socket.
•Make  sure  the  battery  is  correctly  inserted  before  connecting  the 

charger.

•The mains socket must be near to the phone and easily accessible (avoid 

electric extension cables).

•When  using  your  telephone  for  the  first  time,  charge  the  battery  fully 

(approximately 5 hours).

You are advised to ful y charge the battery ( ). Charging status is indicated 
by the depth of water while the phone is powered off. The depth increases 
as the phone is charged.

To reduce power consumption and energy waste, when battery is 

fully  charged,  disconnect  your  charger  from  the  plug;  switch  off 
Wi-Fi,  GPS,  Bluetooth  or  background-running  applications  when 
not in use; reduce the backlight time, etc.

Also See for Alcatel OneTouch ONE TOUCH 993/993D

0.527409s