Acer Veriton 3600G Owner's Manual | Page 21

Acer Desktops Owner's Manual - Veriton 3600G.
Download
Page  of 39
4.7, 1863 votes
background image

11

Eng

lis

h

2

Replace any expansion boards or peripherals that you removed earlier.

3

Replace the side panels.

4

Connect the necessary cables and turn on your computer.

Opening your computer 

Caution: Before you proceed, make sure that you have turned off 
your computer and all peripherals connected to it. Read the 
“Preinstallation instructions” on page 10.

You need to open your computer before you can install additional components.  
See the following section for instructions.  

To remove the computer cover 
1

Turn off your computer and unplug all cables.

2

Place your computer on a flat, steady surface. If your computer is in the 
vertical position, rotate the plastic stabilizers and lay your computer on its 
side.

3

Turn the screws counterclockwise to release the cover.

4

Hold the sides of the cover with both hands. 

5

Slide it back about an inch and then gently lift it upward to detach it. 

To replace the computer cover
1

Align the cover's hinges to the housing frame; then gently push it in to 
slide it back into place. 

2

Secure the cover with the screws. 

Upgrading your computer
Certain components of your computer are upgradeable, such as the memory, 
the hard disk, the CPU and the expansion cards. You need to observe the 
“Installation precautions” on page 10 when installing or removing a computer 
component. However, for safety purposes, we do not recommend that you 
perform these upgrades yourself. If you want to replace or upgrade any of 
these components, contact your dealer or a qualified service technician for 
assistance.

0.550901s