Acer B226HQL Quick Start Manual

Acer Projectors Quick Start Manual - B226HQL.
Download
Page  of 4
4.8, 1550 votes
background image

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions
Please read the following instructions carefully.
1. 

To clean the LCD monitor screen: 

Turn off the LCD monitor and unplug the power cord.

Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. 

Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely 
damage it. 

3. 

Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display. 

4. 

Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform 
servicing of any nature. 

5. 

Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor 
outside this range may result in permanent damage.

6. 

Immediately unplug your monitor and call an authorized technician if any of the following circumstances 
occur:

Monitor-to-PC signal cable is frayed or damaged. 

Liquid spills onto the LCD monitor or the monitor is exposed to rain. 

The LCD monitor or case is damaged. 

Package contents 

LCD 

monitor

Power cord

Audio 

cable 

(optional)

VGA cable

(optional)

DVI cable     DP cable  Quick start 

(optional)

(optional)

guide

Attaching the monitor to the base
1. 

Remove the monitor from the packaging.

2. 

Attach the footstand to the base. (for selected models)

3. 

Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4. 

Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected 
models)

Connecting your monitor to a computer

1. 

Turn off your computer and unplug your computer's power 
cord.

2. 

Connect the signal cable to the VGA and/or DVI-D (optional) 
and /or DP (optional) input socket of the monitor, and 
the VGA and/or DVI-D (optional) and/or DP (optional) 
output socket of the graphics card on the computer. Then 
tighten the thumbscrews on the signal cable connector.

3. 

Optional: Connect the audio input socket (AUDIO IN) of the 
LCD monitor and the line-out port on the computer with 
the audio cable.

4. 

Insert the monitor power cable into the power port at the 
back of the monitor.

5. 

Plug the power cords of your computer and your monitor 
into a nearby electrical outlet. 

English

LR60441

&

86

0.591007s