Acer ALTOS G610 User's Manual | Page 38

Acer Servers User's Manual - ALTOS G610.
Download
Page  of 156
4.5, 1804 votes
background image

 2 System tour

28

Power-on problems

If the system does not boot after you have applied power, check the 
following factors that might have caused the boot failure.

The external power cable may be loosely connected.

Check the power cable connection from the power source to the 
power socket on the rear panel.  Make sure that the cable is 
properly connected to the power supply.  

No power comes from the grounded power outlet.

Have an electrician check your power outlet.

The voltage selector switch may be set to the wrong voltage 
range. 

Verify the applicable voltage range in your area and set the 
voltage selector switch accordingly. 

Loose or improperly connected internal power cables.

Check the internal cable connections.  If you are not confident to 
perform this step, ask a qualified technician to assist you.

Warning! Make sure all power cords are disconnected from 
the electrical outlet before performing this task. 

Note: If you have gone through the preceding actions and the 
system still fails to boot, ask your dealer or a qualified technician 
for assistance.

AA G600.book Page 28 Thursday, August 23, 2001 2:31 PM

Related Manuals for Acer ALTOS G610

0.510694s