HP 2511x 25 inch Diagonal LED Monitor User's Manual | Page 11

HP Monitors User's Manual - 2511x 25 inch Diagonal LED Monitor.
Download
Page  of 42
4.8, 1671 votes
background image

Cleaning the Monitor

CAUTION: Spray the cleaner on a cloth and use the damp cloth to gently wipe the screen surface.

Never spray the cleaner directly on the screen surface. It might run behind the bezel and damage the

electronics.

Do not use cleaners that contain any petroleum based materials such as benzene, thinner, or any

volatile substance to clean the monitor screen or cabinet. These chemicals might damage the monitor.

1. Turn off the monitor and unplug the power cord from the back of the unit.

2. Dust the monitor by wiping the screen and the cabinet using a soft, clean antistatic cloth.

3. For more difficult cleaning situations, use a 50/50 mix of water and Isopropyl alcohol.

Shipping the Monitor

Keep the original packing box in a storage area. You might need it later if you move or ship the

monitor.

To prepare the monitor for shipping:

1. Disconnect the power and video cables from the monitor.

2. Press the button on the front of the pedestal (1) and lift the monitor panel from the base (2).

Figure 2-1  Removing the Monitor Panel

3. Set the panel on a soft, protected surface.

4. Carefully pull the pedestal away from the base to release and separate them.

NOTE: 2511x and 2711x models only: Remove one screw from the bottom of the base to

release the pedestal from the base.

5. Place the monitor, pedestal, and base in the original packing box.

Maintenance Guidelines

5

Also See for HP 2511x 25 inch Diagonal LED Monitor

0.522004s