Dell 5100MP Projector Owner's Manual | Page 29

Dell Projectors Owner's Manual - 5100MP Projector.
Download
Page  of 61
4.1, 1806 votes
background image

Using Your Projector

29

Management Menu

MENU LOCATION—Select the location of the 

OSD on the screen.
PROJECTION MODE—Select how the image 

appears:

 Front Projection-Desktop (the default). 

 Rear Projection-Desktop-- The projector 

reverses the image so you can project from 

behind a translucent screen. 

 Front Projection-Ceiling Mount-- The 

projector turns the image upside down for 

ceiling-mounted projection.

 Rear Projection-Ceiling Mount-- The 

projector reverses and turns the image upside 

down. You can project from behind a 

translucent screen with a ceiling-mounted 

projection.
SIGNAL TYPE—Show signal type RGB, YCbCr, 

YPbPr.
LAMP HOUR—Display the operating hours 

since the lamp timer reset.
LAMP RESET—After you install a new lamp, 

select Yes to reset the lamp timer.
POWER SAVING—Select Yes to set the power saving delay period. The delay period is 

the amount of time you want the projector to wait without signal input. After that 

set time, the projector enters power saving mode and turns off the lamp. The 

projector turns back on when it detects an input signal or you press the power 

button. After two hours, the projector turns off and you need to press the power 

button to turn the projector on.
OSD LOCK—

Select Yes to enable OSD Lock for hiding the OSD menu. (Or 

pressing the Menu button on control for 15 seconds), and select 

No to 

disable the 

OSD Lock for hiding the OSD menu. (Or pressing the Menu 

button on control for 15 seconds again).
RF_CH LEARNING—

Refer to page 34.

ECO MODE—Select On to use the projector at a lower power level (250 Watts), 

which may provide longer lamp life, quieter operating and dimmer luminance 

output on the screen. Select Off to operate at normal power level (300 Watts). 

0.507498s